I had lost hope with my electric cooking plates. The white circles where completely hidden under a layer of diamond-grade burn residue that no amount of scrubbing with chemicals could even begin to remove. I found this 3€ scrapping tool and it’s amazing !!! Sorry, but I don’t have the before picture, believe me after 6 years of usage, it was bad.
deleted by creator
Won’t metal do damage / scratch a glass surface? Is it safe?
Depends on the hardness of the metal you would need a metal.
These stoves are mostly aluminium oxide, which has a mohs hardness of 9 and steel is 4-8.I looked more into it and I found glass ceramic stoves have a mohs hardness of 6-7. So a very hard steel should be able to scratch it, but most steels including stainless should be fine.I’m, I need to correct misinfo here. Induction stove tops are commonly a specific amorphous phase of pokycrystaline glass ceramic compound, which may include aluminum oxide, but is not only Al-Ox. As you sound like you are aware, mild changes to compounds can dramatically alter properties like hardness and plasticity.
With that being said I can’t actually find any verifiable information about the exact compound or additives or hardness. And my point isn’t necessarily that you’re super wrong, it’s just that the hardness may be higher than aluminum oxide alone.
I looked a bit more into it and the first spec I found had a knoop hardness of 600 which should be mohs 6-7 so hardened steel should be able to scratch it.
Is mnoop hardness a special hardness scale for gemstones or something? Never heard of that before. I’m not an actual mechanical engineer though, just a dropout lmao
I read that its used to measure the hardness of brittle materials, but I could be wrong.
Glass is harder than most metals.
It can, yeah. You have to be careful to press gently in the center of the blade and not put pressure on the corners which will gouge huge scratches into glass. I have one of these for cleaning my paint pallette and get double-duty out of it on oven cleaning day.
They make cleaning kits for these stove tops that typically come with a cheaper plastic version of the tool with a weaker metal razor. Still does the job well, but less scratching chance. Also usually comes with a fine-grain polishing cream and sponges to apply it with. The cream helps to buff out lighter scratches and remove some of the cooked on stuff.
It doesn’t scratch the glass, even when applying quite some force. The blade dulls pretty fast, it probably doesn’t have the hardness to damage the glass.
It’s specifically called a [glass/ceramic] stove cleaning [blade/scraper]. I’ve used one a lot and it doesn’t seem to do noticeable damage (glass stove tops need to be pretty tough anyways to handle regular cooking)
As long as you keep the blade flat against the glass it doesn’t scratch. If you use the corner of the blade to scrape it will scratch.
Yes, it’s pretty much just that. It comes with spare blades in the handle, and they are double sided ! Very useful, because they dull pretty fast.
It is!