Y’all, this is gonna be super broad, and I apologize for that, but I’m pretty new to all this and am looking for advice and guidance because I’m pretty overwhelmed at the moment. Any help is very, very appreciated.

For the last ~3 years, I’ve been running a basic home server on an old computer. Right now, it is hosting HomeAssistant, Frigate NVR, their various dependencies, and other things I use (such as zigbee2mqtt, zwave-js-ui, node-red, mosquitto, vscode, etc).

This old server has been my “learning playground” for the last few years, as it was my very first home server and my first foray into linux. That said, it’s obviously got some shortcomings in terms of basic setup (it’s probably not secure, it’s definitely messy, some things don’t work as I’d like, etc). It’s currently on its way out (the motherboard is slowly kicking the bucket on me), so it’s time to replace it, and I kind of what to start over (not completely - I’ve hundreds of automations in home assistant and node-red, for instance, that I don’t want to have to completely re-write, so I intend to export/import those as needed) and do it “right” this time - at this point, I think this is where I’m hung up, paralyzed by a fear of doing it “wrong” and winding up with an inefficient, insecure mess.

The new server, I want to be much more robust in terms of capability, and I have a handful of things I’d really love to do: pi-hole (though I need to buy a new router for this, so that has to come later on unless it’d save a bunch of headache doing it from the get-go), NAS, media server (plex/jellyfin), *arr stuff, as well as plenty of new things I’d love to self-host like Trilium notes, Tandoor or Mealie, Grocy, backups of local PCs/phones/etc (nextcloud?)… obviously this part is impossible to completely cover, but I suspect the hardware (list below) should be capable?

I would love to put all my security cameras on their own subnet or vlan or something to keep them more secure.

I need everything to be fully but securely accessible from outside the network. I’ve recently set up nginx for this on my current server and it works well, though I probably didn’t do it 100% “right.” Is something like Tailscale something I should look to use in conjuction with that? In place of? Not at all?

I’ve also looked at something like Authelia for SSO, which would probably be convenient but also probably isn’t entirely necessary.

Currently considering Proxmox, but then again, TrueNAS would be helpful for the storage aspect of all this. Can/should you run TrueNAS inside Proxmox? Should I be looking elsewhere entirely?

Here’s the hardware for the recently-retired gaming PC I’ll be using:
https://pcpartpicker.com/list/chV3jH
Also various SSDs and HDDs.

I’m in this weird place where I don’t have too much room to play around because I want to get all my home automation and security stuff back up as quickly as possible, but I don’t want to screw this all up.

Again, any help/advice/input at all is super, super appreciated.

  • ratman150@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    9 months ago

    I’ll freely admit to skimming a bit but yes proxmox can run trunas inside of it. Proxmox is powerful but might be a little frustrating to learn at first. For example by default proxmox expects to use the boot drive for itself and it’s not immediately clear how to change that to use that disk for other things.

    The noctua dh-15 is overkill for that cpu btw unless you’re doing an overclock which I wouldn’t recommend for server use. What’s your plans for the 1060? If using proxmox you’ll want to get one of the “G” series AMD CPUs do that proxmox binds to the apu and then you should be able to do gpu passthrough on the 1060.

    • Malice@lemmy.dbzer0.comOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      9 months ago

      I’d planned on using the GPU for things like video transcoding (which I know it’s probably way overkill for). Perhaps something like stable diffusion to play around with down the line? I’m not entirely sure. I do know that, since the CPU isn’t a G series, it’ll need to be plugged in at least if/when I need to put a monitor on it. Laziness suggests I’ll likely just end up leaving it in there, lol. As far as the dh-15, yeah, that’s outrageously overkill, I know, and I may very well slap the stock cooler on it and sell the dh-15.

      Thank you!

      • ratman150@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        2
        ·
        9 months ago

        I have a proxbox with a R5 4600G even under extreme loads the stock cooler is fine. Honestly once prox is setup you don’t need a GPU. The video output of proxmox is just a terminal (Debian) so as long as things are running normally you can do everything through the web interface even without the gpu. I do highly recommend a second GPU (either a G series CPU or a cheap GPU) if you want to try proxmox GPU passthrough. I’ve done it and can say it is extremely difficult to get working reliably with just a single GPU.

        • Malice@lemmy.dbzer0.comOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          9 months ago

          Yeah, I’d definitely considered the fact that I can probably just take the GPU out as soon as proxmox is set up. The only thing I’d leave it for is for transcoding, which may or may not be something I even need to/want to bother with.