• Keyboard: Eliza
  • Case: stacked acrylic
  • Internals: handwired, Elite C v4
  • Plate: Copper
  • Switches: Gateron Ink Black v2
  • Lube: Tribosys 3204
  • Films: Kebo
  • Springs: Tx Springs L 16mm 62gr
  • Caps: GMK Oblivion v3.1 ASCII + GMK Oblivion v2 Git
  • Weight: 786 gr

https://github.com/codybloemhard/eliza

  • 柊 つかさ@lemmy.worldOP
    link
    fedilink
    arrow-up
    2
    ·
    7 months ago

    If you follow the github link (https://github.com/codybloemhard/eliza) you will find a picture of the matrix! I really like the upside down mods for space bars. It depends a bit on how you angle your hands when you type, but if I put the ‘space bar’ modifiers in their regular orientation, the edge will dig into my thumb. One thing I would do differently is the position of the screws. Two of the screws are right where my thumb comes down on the board when I press down the space bars. This was slightly irritating and I had to get used to it.

    • wjrii@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      7 months ago

      Ahh, I didn’t quite gather it was your github. Nice, nice work, certainly cleaner than mine, though mine are better than they used to be, at least for the matrix part; I still tend to let the kraken tentacles loose when wiring it to the MCU.