Looking for a solution on how to determine when to close and open skylight blinds. I can just do hours of the day but would like it to be a bit more intelligent.

Anyone looked at using something like the math used for solar panels? I was thinking that when max solar power was generated in the summer that is when they are closed to keep heat out.

Ideas?

  • yggstyle@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    4 months ago

    So there is a calculation for what time the sun is at a particular angle in the sky which will be relative to your area and factors in the time of year etc. You could use that as it will give you a very specific to your area mathematical answer to when you should close your shades. This is a good start. If you mix that with a light sensor and set minimums that will get you the rest of the way there (no sense run blocking lightning a cloudy day.) You can just use a light sensor but it will be more erratic if you don’t correct for weather and seasonal light levels.

    The rest is personal to how sensitive to light changes and seasonal settings you apply to it.

    As far as the physical control goes - there are several commercial devices available as well as diy solutions involving motors and 3d printing on YouTube.

    • Starfighter@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      5
      ·
      4 months ago

      Additional information regarding Home Assistant:

      The sun component (which should be enabled by default) already computes the sun position for you.

      Elevation and azimuth are available as standalone sensors sensor.sun_solar_azimuth (might be disabled by default) or as attributes on the sun.sun entity.

  • thr0w4w4y2@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    2
    ·
    4 months ago

    Hey, I have a Shelly window/door sensor on my bifold door. It includes a lux and temperature sensor, which i’m using to close the blinds (luxaflex/hunter douglas) if the temperature exceeds a certain level along with a high light level.

    In practice where I live it is easier to close the blinds based on the current outside temperature, but the window/door sensor makes a good second check. it also prevents the blinds from operating if the door is open!

      • thr0w4w4y2@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        2
        ·
        4 months ago

        I’ve had this one (it’s the Wifi version not Bluetooth) for about four months and it claims that the battery is at 81%. I’ve not owned it long enough to say if that is a linear or exponential (or totally made up) value.

          • thr0w4w4y2@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            1
            ·
            4 months ago

            I expect it varies depending on how often you open the door, what firmware it’s on, whether it’s MQTT or something else etc etc.

  • peregus@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    4 months ago

    It’s not clear to me if you have photovoltaic panels and can use the data from them or not.

    • sytone@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      4 months ago

      I don’t have panels. I was wondering if I can apply the same math and if so has anyone done this in home assistant already.

  • NeoNachtwaechter@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    4 months ago

    Just a few ideas for very easy math:

    Start with the sunrise and sunset times. You can have them automatically for your location.

    Calculate the middle between these: this is your best “noon” time (free of DST etc).

    Calculate the duration between these: the longer it is, the warmer.

  • Dabundis@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    4 months ago

    If your goal is just to prevent glare from direct sunlight? Maybe a purely passive diffuser is what you’re looking for