I have an old Synology 1819 NAS that was the unfortunate victim of the Intel Atom/Clock bug. I would like to repurpose the case as I like the compact form factor. Has anyone tried replacing a synology mobo with something else (ex: an ITX board or a Raspberry Pi), and using an alternative operating system?

  • wallybeavis@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I was incorrect about the model#, it’s actually an 1815. I’d had it apart for so long I’d forgotten. I was going to try the resistor ‘fix,’ but too many people were reporting erractic behaviour after they’d done the same. I may re-purpose the case for something else as it seems only something like a Raspberry pi or one of the Adafruit boards would fit

    • Dr_Frankenstein@sh.itjust.works
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Ahh I have one as well that is flaky I have the resistor fix and changed the other part and new psu. This will sound odd but if you warm up the motherboard side of the case with a hair dryer it should boot. Not hot just warm. It will just continue to work.

      • wallybeavis@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        I’m going to have to give the hair dryer trick a shot, I’d already migrated to a 1821, so I’m not sure if it’ll boot diskless…but getting a busted NAS to boot with a hairdryer, is too hilarious not to attempt 😂

      • Nogami@lemmy.world
        link
        fedilink
        arrow-up
        2
        arrow-down
        1
        ·
        1 year ago

        This might mean a failing capacitor. I had a MB that was similar. If it was a cold start it would not boot properly. When it was already warm it would boot first time no issue.