It shouldn’t mess with your current routing but if you’re running other VPNs you may run into issues.

After you join the machines to the tailnet, each machine gets a new IP address ( only visible to other machines in the tailnet), by default it’s a 100.x.y.z you can check the tailnet for the device IP.

Now you can keep the port closed on your router and it will still be accessible over the usual lan ip and port. But when you want to access remotely, turn on tailscale and connect using the tailnet IP.

Another cool thing you can do with this setup is turn your home server into an exit node. By default it will only route things that are in the tailnet (100.x.y.z subnet). But if you turn your home server into an exit node you can funnel all your traffic back through the exit node. Instant free VPN back home!

Here you go friend, enjoy! 😁

https://tailscale.com/blog/how-tailscale-works

Unencrypted HTTP can mean that anyone can see your traffic as it passes through their network. Your ISP will see that traffic. If you’re streaming pirated music and you’re in a country that cares about those things, might not go very well. From a security stand point though, you still wouldn’t want to trust the authentication on the open port. A vulnerability may exist that you don’t know about. It’s always better to keep them closed and add another layer or two between your home computer and the public.

Tailscale let’s you tunnel into your home network without opening any ports, and it encrypts the traffic. Much safer way of doing it.

Go on…

What kinda issues are you having? Most of my problems with Nix are solved with overlays or creating a module. Admittedly, in order to do that you still have to know how to fix your issue the usual linux way. Afterall, Nix is more of an abstraction tool IMO; good for replicating something across a ton if devices. If you don’t need that, there’s other distros that work much better out of the box.

Another tip, please be very careful when exposing ports to the public. With docker you’re already mitigating your attack surfaces but an open port allows anyone to make a connection and there are lots of bots out there looking for open ports and vulnerabilities. A good alternative would be to setup wireguard and instead then connect through that or if you like simplicity check out Tailscale.

This is kinda how I’ve come to look at it. You cannot ask questions of fact to a machine that works in probabilities.

Ha, ya know? I think I know some people who will just regurgitate whatever input they receive

…

:(

Mullvad let’s you write down an account number on a piece of paper and mail it in with cash and they’ll activate it.

What do you mean? If it makes you feel any better, the Earth will be fine. Has been for a couple billion years. We did this to ourselves :(

I just want to say, your work on that game absolutely would’ve contributed to making my high-school years better. Me and my social group played this game constantly, spent tons of hours playing SF Refinery 😂 From the bottom of my heart, thank you so much!!

I recall it being fully simulated. You had to walk into a class room and sit down and watch a like 45min (maybe? Idk this was over a decade ago) presentation on an overhead where an instructor went over a combat life saver course. You’d have a test to answer with multiple choice questions that you had to pass at the end lol

Nawww it was way harder than that!! If you wanted to play as the medic class in a game online you had to do the offline training. The training made you sit through like a 45 minute long combat life saver class. No shit had to like walk into the classroom and sit near the projector and look down to answer questions lol

If you wanted to do the Special Forces maps (basically night mode maps) you had to pass this skull dragging class where you had to avoid being spotted and slowly move into an area. I remember trying for like 3 days just to pass that friggin class!

:3

You like using window managers, don’t you?

You’re not going to win over people with condescension. You do see the irony of being a dick while trying to defend people, right?

Use nix repl! That stands for Read Eval Print Loop. You can evaluate a nix expression and see all the attributes inside. For example, on a non-flake system, use :l <nixpkgs/nixos> inside the repl to load the current system. Then you can hit the tab key to show whats inside of the current attribute set, make sure you have a . at the end. Then you can press enter to evaluate and see the declaration. For example when you set networking.hostName in configuration.nix you can actually find it under options.networking.hostName.value evaluating that in the repl.

Imo the worst part of nix is how it turns into this chicken or the egg scenario. Let me explain, nix is very good at reproducing things. It ensures that all things are the same when installing a piece of software. Once someone writes a nix module, generally speaking, it “just works”. You can always take that nix file and get it to run the same way on another machine. But since most gamers/musicians don’t give two shits about reproducible software, it doesn’t get packaged. And with no packages they will never be interested to get into nix.

As I write this though I realize, many open source projects have struggled with getting contributions from the community. Personally, I just think nix solves the issue of “idk, it works on my machine” better than anything I’ve seen. Being able to reproduce software and stop dependency issues is a very valuble thing, just not for everyone.

Hey this is a great web server example! Instead of commenting it out to enable or disable you can actually turn it into a full module. Check out this example of a nix module. Basically, you can take your code you pasted and put it under the config set. Then create an option to enable that set of code. Now you can always have this nix file imported, but enable the option only when you need it with another declaration. Really, that’s how all the declarations work you’re just getting the nix files from github and nixpkgs.